STAGE 1 – TWIST-IN SEDIMENT FILTER CARTRIDGE. Aquatic Life Twist-In Sediment Filter Cartridge: Recommend replacing every 6 months. 5-Micron Sediment Filter that traps sediment and other particulate matter like dirt, silt and rust which will affect the taste and appearance of your water. Working Pressure: Minimum 35 PSI, Maximum 80 PSI, Ideal 65 PSI. Item 330377.
STAGE 2 – TWIST-IN CARBON BLOCK FILTER CARTRIDGE. Aquatic Life Twist-In Carbon Block Filter Cartridge: Recommend replacing every 6 months. Reduces chlorine and conditions water prior to an RO membrane. Working Pressure: Minimum 35 PSI, Maximum 80 PSI, Ideal 65 PSI. Item 330379.
STAGE 3 – TWIST-IN RO MEMBRANE FILTER CARTRIDGE. Aquatic Life Twist-In TFC RO Membrane Filter Cartridge, 100 GPD: Recommended replacing every 1-2 Years. The RO Membrane reduces impurities known as Total Dissolved Solids (TDS) from the water down to 1/10,000 of a micron, reducing arsenic, lead, parasitic cysts, copper and more. Working Pressure: Minimum 35 PSI, Maximum 80 PSI, Ideal 65 PSI. Flow Rate: 100 GPD. Item 330375
STAGE 4 – TWIST-IN MIXED BED COLOR CHANGING RESIN DEIONIZATION CARTRIDGE. Aquatic Life Twist-In Color Changing Dual Deionization Filter Cartridge: Replace when the resin color changes completely. After the water is filtered by a membrane (not included), there is usually a small amount of Total Dissolved Solids (TDS) left in the water. In certain non-drinking water applications, it is important to remove the remaining TDS from the water. This is accomplished by filtering the water through a resin that is charged with Cation and Anion resins (H+ and OH-). As the resin absorbs the TDS, it will change color. When the entire resin has changed color, it is time to replace the DI filter. The new twist-in media cartridge design makes filter changes simple, easy and clean – no tools required and no mess! The twist-in cartridges can be easily changed in only seconds with just a quarter turn and without contact with used filter material. It is important the cartridges are installed post membrane filter to prolong the life of the Deionization (DI) cartridge. Working Pressure: Minimum 35 PSI, Maximum 80 PSI, Ideal 65 PSI. Item 330380.